XP STOP ERROR Error Code: 0x0000008e
                                                                                                             



Tech Advise:1

To remove this problem follow these steps:

Remove some of the memory modules that are installed on the computer.
Leave at least the RAM that is required for the computer to start & run Windows XP.
The recommended RAM to run Windows XP is 128 megabytes MB.
The minimum is 64 MB & the maximum is 4 gigabytes.

 For example if two 256-MB memory modules are installed on your computer remove one of the memory modules.
 Restart your computer & then run the Setup program:
 Insert the Windows XP Setup CD-ROM in the CD-ROM drive >> start the computer >> then click OK to select the first option screen to install a copy of Windows XP.
 Click Accept  >> then follow the instructions on the screen to complete the Windows XP installation.
 If you again receive the error message that is mentioned in the Symptoms section go to
 Remove a different memory module, or install the RAM in a different memory slot.
 Restart your computer >> & then rerun Setup.

You may have to restart your computer several times to identify the specific memory modules that are not working correctly.

               
Tech Advise:2

 The proper problem diagnostic is minidump investigation.
 The crash may be caused by faulty ram or device driver error.
 When Windows crashes with blue screen
 It writes a system event 1001 or 1003 & a minidump to the folder \windows\minidump.
 Check system event 1001 & 1003 & it has the content of the blue screen.
                

  Event ID: 1001
  Source: Save Dump
  Description:

  The computer has rebooted from a bugcheck.The bugcheck was : 0xc000000a (0xe1270188, 0x00000002, 0x00000000, 0x804032100).
  Microsoft Windows..... A dump was saved in: .......


   Event Source: System Error
   Event Category: 102
   Event ID: 1003
   Description:

   Error code 1000007f, parameter1 0000000d, parameter2 00000000, parameter3 00000000, parameter4 00000000

  Click On Start >> Control Panel >> Adminstrative Tools >> Event Viewer >> System >> Event 1001/1003.
  Copy the content & paste it back here

  Zip 5 to 6 minidumps to a zip file & attach it at any webspace.
  I will study the dump & find out the culprit.


Tech Advise:3
 
Check for updated driver for broadb& adapter  because this could be adriver issue. 
Device manager might hold a clue.


CAUSE:
              
 One or more of the random access memory RAM modules that are installed on your computer are faulty.
 The RAM configuration is incompatible with Windows XP.
 This issue is caused by a code problem in GDI the graphics device interface for Windows XP

Download PC Optimizer 360 to fix  XP STOP Error 0x0000008e         

Download Pc Optimizer 360

Topics, Files and Tools to Clean Related XP STOP Error 0x0000008e

Xp stop error 7e
xp stop error 0x0000008e problem
bugcheck 8e
how to clear xp error 0x0000008e